When creating a new Studio Set, or editing a Studio Set and the associated parts, it is often useful to "Initialize" to reset all of the settings.

To initialize a Studio Set:

1. Press the MENU button.
2. Move the cursor to “Studio Set Init” and press the ENTER button.
3. Select "Studio Set," and then press the 7 (Select) button.
4. Press the 6 (OK) button to confirm.

To initialize a Part:

1. Press the MENU button.
2. Cursor to "Part View" and press the ENTER button.
3. Use the Up/Down arrow buttons to select the Part you wish to initialize (1-16).
4. Press the 5 (Part Init) button.
5. Press the 6 (OK) button.

Note: The Voice Reserve setting is not initialized when using this procedure.