Use the following procedure to return the FA-06 and FA-08 to their factory-default settings:

Note: This procedure will erase any user data, so back up any important information before proceeding.

1. Press MENU.
2. Cursor to "Utility" and press ENTER.
3. Cursor to “Factory Reset” and press ENTER.
4. Press the [6] (OK) button.

If you decide to cancel, press the [7] (Cancel) button.

Note: Never turn off the power while the Factory Reset operation is in progress.

The data on the SD card will not return to the factory-set state. If you need to restore the factory demonstration material to the SD card, you can download it from our website here:

http://www.roland.com/support/article/?q=downloads&p=FA-06